GL-24L Gantry Machining Center

Parameters	Unit	G3024L	G3524L	G4024L	G4524L
Door width	mm	2400	2400	2400	2400
X-axis	mm	3000	3500	4000	4500
Y-axis Travel	mm	2400	2400	2400	2400
Z-axis	mm	850(1050)	850(1050)	850(1050)	850(1050)
From spindle nose to worktable face	mm	200-1050(200-1250)	200-1050(200-1250)	200-1050(200-1250)	200-1050(200-1250)
Table width	mm	1600	1600	1600	1800
T-slot	mm	22	22	22	22
bearing	t	7	8	9	11
Spindle type		Belt 1:1.33	Belt 1:1.33	Belt 1:1.33	Belt 1:1.33
Spindle taper hole specification		BT50	BT50	BT50	BT50
Spindle speed	rpm	6000	6000	6000	6000
Main motor power	kW	15/18.5	15/18.5	15/18.5	15/18.5
Spindle Torque	N.m	190/313	190/313	190/313	15/18.5
Spindle box section	mm	350×400	350×400	350×400	350×400
X-axis Rapid Traverse	m/min	12	12	12	12
Y-axis Rapid Traverse	m/min	12	12	12	12
Z-axis Rapid Traverse	m/min	12	12	12	12
Cutting Speed	m/min	8	8	8	8
Positioning Accuracy X（half-closed loop）	mm	0.02	0.021	0.022	0.025
Positioning Accuracy Y（half-closed loop）	mm	0.019	0.019	0.019	0.019
Positioning Accuracy Z（half-closed loop）	mm	0.017	0.017	0.017	0.017
Repeatability Accuracy X（half-closed loop）	mm	0.014	0.015	0.016	0.018
Repeatability Accuracy Y（half-closed loop）	mm	0.014	0.014	0.014	0.014
Repeatability Accuracy Z（half-closed loop）	mm	0.008	0.008	0.008	0.008
Power capacity	Kva	30	30	30	30
Air source pressure	Mpa	0.65	0.65	0.65	0.65
Machine size	mm	4800	4800	4800	4800
height
Floor area (about)	mm×mm	9800X5800	10800X5800	11800X5800	12800X5800
Machine weight	T	27	30	33.5	37